Scrappers Recycling Technology Expanded Medium Line for cable recycling otros equipo de reciclaje

Expanded Medium Line for cable recycling
Performance: Approx. 300 kg/h - 500kg/h

Line consist of:

1. MCW-52 Shredder
-loading conveyor
-unloading conveyor with magnetic separator
-SM-370 magnetic separator
-magnetic plate
2. Belt dispenser
3. MPK 600 Tornado Mill
4. Dust Extraction Unit
5. Loading Conveyor
6. MPK 600 Tornado Mill
6. Dust Extraction Unit
7. Unloading conveyor + magnetic plate
9. Gold River Wet Separator SPM-700


1. MCW-52 Quad shaft shredder

Quad Shaft Shredder from MCW series was based on many years experience in the plastic and scrap industry.
MCW Shredder is highly reliable and universal primary Shredder for any kinds of plastic materials, rubber, wires, electronic scrap, post-production waste as well as slight magnetic materials.
Technical specifications:
• Cutting chamber dimensions - 510 × 760 mm
• Length and width - 2600 × 1530 mm
• Two 11 kW Engines synchronized with gears
• Number of shafts – 4 pcs
• Cutting knives - 23 pcs
• Feeding knives - 23 pcs
• Control panel with a safety system that prevents the motors from being overloaded
• Screen - basic ø 20mm (or any diameter upon customer’s request)
• Performance 400-600 kg/h (depending on the type of material)
• Powder-coated RAL 3020

Loading belt conveyor (connected to Shredder, works depending on overload)
• Length - 4000 mm
• Belt width - 720 mm
• Height - 2100 mm
• Motor - 1.5 kW
• Horizontal cleated belt, made of PVC
• Steel frame with self-aligning wheels
• Powder-coated RAL 3020
Unloading belt conveyor (collects shredded material and transports it further)
• Length - 3600 mm
• Belt width - 400 mm
• Height - 2000 mm
• Motor – 1.1 kW
• Cleated belt with sidewall made of PVC
• Steel frame with self-aligning wheels
• Powder-coated RAL 3020
Magnetic Separator SM-370 - (separates steel from the rest of the material, works at the same time with belt conveyor)
• Length - 1400 mm
• Belt width - 380 mm
• Height - 300 mm
• Motor - 0.55 kW
• Made of Stainless steel
• Cleated belt made of PVC
• Inner plate made of permanent magnet
• Powder-coated RAL 3020
Magnetic plate with quick clean system - (second line of separation, collects small steel pieces with quick detach cover, it is easier to clean magnetic plate)
• Length - 490 mm
• Belt width - 330 mm
• Height - 80 mm
• Plate cover made of stainless steel

2. Belt dispenser BMT-01 :

Belt dispenser used to automatically dispense pre-ground material into vertical mills and more. The dispenser works perfectly with the grinding mill according to its load, eliminating downtime in the delivery of material. The dispenser is equally good for dispensing loose materials to other devices and successfully replaces the material dispensing operator.

Technical information:
• Length - 490 mm
• Power – 4,45kW
• A storage tank with a capacity of approximately 1,3 m3
• Material layer adjustable plate
• Control cabinet
• Acceptable dosing size of material 10-25mm

3. Tornado Mill 1st Line:
• A storage tank with a capacity of approximately 1,3 m3
• Cutting chamber ⌀570
• Engine Power 22 kW
• Fixed Knives - 4 pcs
• Rotary Knives - 3 pcs
• Control panel with an electrical security system
• Basic hopper with dust curtain
• Mill drop chute adapter to transport conveyor
• Spare knives set - 7 pcs
• Spare sieves set - 10 pcs
• Powder- coated RAL 3020

4. Dust extraction unit :
• Exchangeable filter bags made of ultra-thick material
• Flexible tube ⌀160 connected to Mill
• Engine power 2,2kW

5. Belt Conveyor (1st – 2nd line)
• Gear motor– 0,75kW
• Steering rollers – 6 pcs
• Transport belt equipped with sidewall and cleats
• Magnetic drum plate (mounted on one of conveyors)
• Custom made drop chute ø160mm with splitter for 1st and 2nd Mill
• Powder-coated RAL 3020

6. Tornado Mill 2nd Line:
• Cutting chamber ⌀570
• Engine Power 22 kW
• Fixed Knives - 4 pcs
• Rotary Knives - 3 pcs
• Control panel with an electrical security system
• Basic hopper with dust curtain
• Mill drop chute adapter to transport conveyor
• Spare knives set - 7 pcs
• Spare sieves set - 10 pcs
• Powder- coated RAL 3020

7. Dust extraction unit :
• Exchangeable filter bags made of ultra-thick material
• Flexible tube ⌀160 connected to Mill
• Engine power 2,2kW

8. Belt Conveyor – (2nd line Mill – SPM700)
• Gear motor– 0,75kW
• Steering rollers – 6 pcs
• Transport belt equipped with sidewall and cleats
• Powder-coated RAL 3020
• Conical discharge ended with a connector ø 200mm to SPM700

9. Wet separator Gold River SPM-700

Technical information :
• Power – 4,5 kW
• Supply – 400 V; 50 Hz
• Separation table dimensions : 700 x2500 mm
• Performance – 300 kg/h
• Dimensions – 4000 x 1250 x 1500 mm
• Weight – 650 kg

Spare parts:
• 46 pcs feeding knives for MCW (two sets)
• 46 pcs cutting knives for MCW (two sets)
• 28 pcs knives for Tornado Mill (two sets)
• 40 pcs sieves for Tornado Mill (two sets)
• Set of anchors for SPM Gold River
• Set of bags for dust extraction unit

Control Unit:
• Processor OMRON
• Circuit breaker Schneider Electric
• Driver LS Electric
• IP55